esd electronics, Inc.
Ethernet Technologies
SAE J1939 Technologies
Home > Hardware > VME >


Item #: V.1940.01
Availability: Call For Pricing - (413) 772-3170
Usually ships In 2 Weeks

    VME Master CPU with 64-bit PowerPC™ T1022 and XMC/PMC Slots

    High-End PowerPC QorIQ CPU

    • VME master CPU A16/A24, D16/D8 (EO) and SGL arbiter
    • Freescale™ PowerPC QorIQ T1022, 1.2 GHz, 64-bit architecture, Double Precision Floating Point Unit, Ethernet, ECC-RAM
    • Xilinx® FPGA Artix 7 (XC7A35T) for VME interface
    • 2x XMC/PMC slots
    • RTC with battery backup
    • 2x GB-Ethernet, 1x RS-232
    • USB at 4-pin header
    • I/O interfaces designed to be compatible with Motorola CPU MVME5110

    Health Features

    • Local voltage and temperature monitoring
    • Backup Flash selectable via jumper
    • Watchdog
    • Over temperature protection
    • 8 user configuration jumpers

    Wide Range of Software Support

    Customization on Request

    • Low power CPU QorIQ T1014 (one core)
    • MRAM (2 MB instead of 128 Kbyte)
    • DDR3 RAM (2 GB instead of 512 Mbyte)
    • Flash (2x 128 Mbyte instead of 2x 16 Mbyte)
    • Gold Cap (backup time 7 days) instead of battery
    • More customized solutions on request

    64-Bit VME PowerPC Master CPU

    The VME-CPU/T10 is a VMEbus CPU board with 2 XMC/PMC slots. The Freescale PowerPC QorIQ T1022 with 1.2 GHz features two 64-bit e5500 Power Architecture® processor cores with high-performance data path acceleration architecture (DPAA) and network peripheral interfaces. The local memory bus is 64 bits wide plus 8 bits ECC with an overall capacity of 512 Mbyte. 16 Mbyte SPI Flash for boot loader and 32 Kbit I²C EEPROM for U‑Boot environment offer non-volatile memory spaces. The VME-CPU/T10 is equipped with a second 16 Mbyte backup SPI Flash selectable by jumper that can be used for system recovery, if a system crash occurs during a firmware update.

    VMEbus Interfaced by FPGA

    The Xilinx FPGA Artix 7 FPGA is connected to the CPU by local bus for low latency data exchange and by PCI Express for high bandwidth data exchange. The VMEbus master interface offers a A16/A24, D16/D8 (EO) and a SGL arbiter. A VMEbus slave interface is not supported.

    XMC/PMC Interfaces

    The XMC interface comes with 2x 1-lane PCIe bus and is designed according to VITA 42.3. Both PMC interfaces support 32 bit / 66 MHz PCI bus according to PCI Local Bus Specification 3.0.

    Gigabit Ethernet

    The VME-CPU/T10 is equipped with two Gigabit Ethernet interfaces accessible at the front panel, which give an excellent base for EtherCAT® applications. One of the Ethernet interfaces can be routed to VME P2 (100 Mbit/s only).

    Console (Serial)

    A RS-232 interface with RJ45 connector is accessible at the front panel.

    Software Support

    The Flash memory carries the standard boot program U-Boot and enables the VME-CPU/T10 to boot various operating systems from on-board Flash, network or USB. BSPs are available for OS-9, QNX, Linux and VxWorks. The esd EtherCAT master is available for VxWorks and other operating systems.

    Customization on Request

    The VME-CPU/T10 is also available with the power saving single core QorlQ CPU T1014 with 1-lane PCIe (therefore only one XMC interface) on request. The memory can be extended with an additional MRAM, DDR3 RAM and Flash. Instead of the battery a Gold Cap can be equipped.

    Download the VME-CP/T10 data sheet (PDF)...

    Phone:413-772-3170 - Fax:413-772-3171 - Web: