|
Home > Hardware > Embedded Systems >
EPPC-405 - Low-Cost 200 MHz PowerPC Computer
EPPC-405
Item #: I.2001.xx
Availability: Call For Pricing - (413) 772-3170 Usually ships In 2 Weeks
Choose your operating systems: |
Choose your option: |
Update price
EPPC-405
Not recommended for new designs.
Low-Cost 200 MHz PowerPC Computer
- PowerPC IBM 405GP, 375 MiPS, 200 MHz, up to 64 Mbyte RAM
- 10/100BaseT ETHERNET
- CAN & RS-232 interfaces
- Strong aluminium case for hat-rail mounting
- All connectors accessible at the front panel
- Power supply voltage 24 VDC
- Operating system Linux or VxWorks
- Option: CoDeSys programming and run-time system according to IEC61131-3
PowerPC Device
The EPPC-405 is a stand-alone Power PC in a strong and compact aluminium case without fan cooling. The powerful IBM PPC405GP with 200 or 266 MHz enables a performance of up to 375 MIPS. The board is equipped with 16 or 64 Mbyte SDRAM, up to 8 Mbyte Flash and a CompactFlash slot to carry various memory cards. A non-volatile NVRAM enables the EPPC-405 to save valuable process variables during power off sequences.
Network Interfaces
The EPPC-405 comes with an ETHERNET interface for 10 Mbit/s and 100 Mbit/s nets. It is accessible as 10/100BaseT via RJ45 connector in the front panel. The EPPC-405 (I.2001.03) provides 2 CAN interfaces based on SJA1000 CAN - controllers with transfer rates up to 1 Mbit/s. Designed according to ISO 11898 with electrical isolation and DSUB9 connectors, the EPPC-405 has CAN and RS-232 interfaces. The EPPC-405 (I.2001.02) provides 2 serial interfaces as RS-232 via RJ11 and DSUB9 connector. With 2 serial interfaces only one CAN interface is equipped.
Software Support
The flash memory carries a standard ppcboot and enables the EPPC-405 to boot various operating systems from network, onboard Flash or CompactFlash. Thus Linux and VxWorks are directly supported with full support of on-board drivers by esd, others on request. There is also a bunch of higher layer protocols like CANopen, DeviceNet as well as an on-board web server available. With the IEC61131-3 programming and runtime system CoDeSys the EPPC-405 acts like a PLC. Please ask for our CoDeSys flyer.
Technical Specifications:
Microcontroller and Memory: |
Microcontroller: |
IBM PPC405GP, 200/266 MHz, 32 bit |
Memory equipped: |
from 4 M x 32 bit SDRAM (16 MB),
up to 16 M x 32 bit SDRAM (64 MB),
up to 8 M x 8 bit Flash EPROM (1,2,4,8 MB),
32 KB NVRAM |
CompactFlash: |
Type I, 3.3 V, .True IDE. mode, slot internally accessible only |
Interfaces: |
ETHERNET: |
10/100BaseT, IEEE802.3, RJ45-connector |
Serial: |
1x RS-232 at RJ11-connector,
1x RS-232 at DSUB9 (only at I.2001.02) |
CAN: |
Controller SJA1000, CAN 2.0A/B, electrically isolated, 1 Mbit/s, ISO11898, DSUB9, option: fiber optic interface |
DeviceNet (Option): |
Acc. to DeviceNet Communication Model and Protocol rev. 2.0 |
General: |
Ambient temperature: |
0...50 /C |
Power supply: |
24 VDC / 300 mA |
Dimensions: |
105 x 55 x 200 mm |
Order information:
Designation |
|
Order no. |
EPPC-405 |
IBM PPC405GP, 200 MHz 16 MB SDRAM, 4 MB Flash, 2x RS-232, 1x CAN |
I.2001.02 |
EPPC-405-2 |
As I.2001.02, but 1x RS-232, 2x CAN |
I.2001.03 |
EPPC-405-DN |
As I.2001.02, but 1x RS-232, 1x CAN, 1x DeviceNet |
I.2001.04 |
EPPC-405-LW |
As I.2001.02, but 1x RS-232, 1x CAN, 1x CAN fiber optic interface |
I.2001.05 |
EPPC-405-VxW |
VxWorks operating system |
I.2001.31 |
EPPC-405-Linux |
Linux operating system |
I.2001.32 |
EPPC-405-CoDeSys |
CoDeSys programming system |
I.2001.33 |
EPPC-405
Low-Cost 200 MHz PowerPC Computer
- PowerPC IBM 405GP, 375 MiPS, 200 MHz, up to 64 Mbyte RAM
- 10/100BaseT ETHERNET
- CAN & RS-232 interfaces
- Strong aluminium case for hat-rail mounting
- All connectors accessible at the front panel
- Power supply voltage 24 VDC
- Operating system Linux or VxWorks
- Option: CoDeSys programming and run-time system according to IEC61131-3
Not Recommended for New Designs
Download complete data sheet (PDF-File) Download complete product manual (PDF-File)
|