CAN-PC104/200

PC/104-Interface with three CAN-Controllers - also available with individual controllers

• PC/104 CAN interface
• Three CAN controllers at one board: Intel 8257, Siemens 81C91, Philips SJA1000
• Easy to use for evaluation and starter kits
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
• Suitable for CANOpen and J1939.

CAN Interface Board for PC104

The CAN-PC104/200 module is an 8-bit plug-in-board designed for the PC/104 bus. It is equipped with the three standard CAN controllers – Intel 8257, Siemens 81C91, and Phillips SJA1000 each representing the FULL or BASIC CAN operation mode to meet the user’s individual requirements.

CAN Interface

The fully ISO 11898 compliant CAN interface allows a data transfer rate of 1 Mbit/s, and the CAN interface is opto-isolated.

Real Time Software Support

The board is supported with VxWorks drivers for each CAN controller on CAN layer 2 access. Some C sample code for initialization, setting of the CAN baud rate and application oriented CAN read and write commands are included.

Other Software

Software drivers are available for Windows, Linux, VxWorks, Solaris, and QNX. Data reception depends on the bitrate, the performance and the operating system of the host CPU.

Technical Specifications

PC104 interface
PC104 interface	Data: 8 bit, IRQ: 1 of 12
CAN bus
CAN controllers	Phillips SJA1000, Intel 82527, and Siemens 81C91
General
Temperature	0…50o C
Humidity	Max. 90%, non-condensing
Supply voltage	5 VDC
Connector	CAN 9-pole DSUB (male)
	DeviceNet: 5-pole connector

Order information

Designation		order no.
CAN-PC104/200-1	1x CAN, 3 controllers	C.2013.02
CAN-PC104/200-P	1x CAN, only Phillips SJA1000	C.2013.04
CAN-PC104/200I	1x CAN, only Intel 82527	C.2013.05
CAN-PC104/200S	1X CAN, only Siemens 81C91	C.2013.06
Licenses
CAN-DRV-LCD	Object license for Windows & Linux w/CD-ROM	C.1101.02
CAN-PC104/200-VxW	VxWorks CAN-API object license	C.2013.55
CAN-PC104/200-QNX4	QNX4 CAN-API object license	C.2013.32
CAN-PC104/200QNX6	QNX6 CAN-API object license	C.2013.33
CAN-PC104/200-Co	CANopen object license	C.2013.12
Manual
CAN-PC104/200-ME	Hardware manual	C.2013.21
CAN-API-ME	Software manuals for CAN-API & SOD-API	C.2001.21
CAL/CANopen-ME	CANopen manuals	C.2002.21

 

CAN-PC104/200

PC/104-Interface with three CAN-Controllers - also available with individual controllers

• PC/104 CAN interface
• Three CAN controllers at one board: Intel 8257, Siemens 81C91, Philips SJA1000
• Easy to use for evaluation and starter kits
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
• Suitable for CANOpen and J1939.

Download complete data sheet (PDF-File)
Download Hardware Installation & Technical Data (PDF-File)
Download CAN API Part 1 Manual (PDF-File)
Download CAN API Part 2 Manual (PDF-File)
Download CANopen Manager Software Manual (PDF-File)
Download CANopen Slave Software Manual (PDF-File)

CAN-PC104/200

PC/104-Interface with three CAN-Controllers - also available with individual controllers

• PC/104 CAN interface
• Three CAN controllers at one board: Intel 8257, Siemens 81C91, Philips SJA1000
• Easy to use for evaluation and starter kits
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
• Suitable for CANOpen and J1939.

The CAN – PC104/200 is a low-cost, 8-bits-plug-in board designed for the PC104 bus. esd electronics has equipped this module with the three major CAN controllers - Intel 8257, Siemens 81C91, and Phillips SJA1000 - each representing the FULL or BASIC CAN operation mode according to the user’s requirements making it easy to use for evaluation and starter kits.

The fully ISO 11898 compliant, electrically isolated, CAN interface allows a data transfer rate of 1 Mbit/s. esd electronics’ CAN – PC104/200 board is supported with VxWorks drivers for each CAN controller on CAN layer 2 access, some C sample code for initialization, setting of the CAN baud rate, and application oriented CAN read and write commands. There are software drivers available for Windows, Linux, VxWorks, Solaris, ZNX, and drivers for other operating systems are available upon request.