|
|
Home > Hardware > VME >
VME-PMC-CADDY/2
VME-PMC-CADDY/2
Item #: V.1915.xx
Availability: Normally Stocked
Usually ships In 2 Weeks
Choose your option:
Update price
VME-PMC-CADDY/2
Intelligent
VME-Carrier Board for PMC ModulesMaster or slave
functionality
4-level arbiter
Address/data up
to A64/D64
VME64-extension
connector
2eVME and 2eSST
fast protocol
Slots according
to IEEE Std 1386-2001 specified
Two single size
PMC modules insertable
VME-PCI Bridge
Tundra Tsi148
PMC I/Os applied
to VMEbus P2, signals routed acc. to VITA 35 (P4V2-64ac, P4V0-64)
Option ‘-32P2’:
different P2-pinning
PPMC according to
VITA 32
Optional one XMC
according to VITA 42.3
PCI 64 bit at 66
MHz, 3.3 V only
Freescale MPC
8349
400 MHz
128 Mbyte DDR2
RAM ECC
4 Mbyte Flash
(NOR)
2x RS-232 serial
interface
Versions for
extended temperature range available
Conduction cooled version
VME-PCI Link
The VMEbus unit VME-PMC-CADDY/2 is a VME64-base board that can carry up
to two PMC modules of normal size. For the VMEbus connection, esd electronics
uses the VME-PCI Bridge Tsi148 by Tundrap.
VMEbus Interface
The Tsi148 design allows the board to operate either as slave or as master
on the VMEbus. Operating as a master, it supports a 4-level arbiter. The VMEbus
interrupt can be applied to any of the seven interrupt-request lines. Two 160-pin
VG-connectors (complementary to DIN41612) connect the board to the VMEbus for
VME64 systems. LEDs in the front panel indicate an active VMEbus-interrupt
request and a VMEbus access onto the board.
PMC Slots
The two PMC slots, designed according to the standard IEEE Std
1386-2001 (except the standard I/O pin routing)), make it possible to insert
all PMC modules using 3.3 V signaling. In addition to the connectors for the PMC
address/data and control signals, every slot of the VME-PMC-CADDY/2 has an I/O-connector
that applies the I/O signals of the PMC modules to VMEbus connector P2. Two
different P2 pin assignments are available: In the standard configuration, each
P2-pin connects to one I/O-pin of the PMC modules acc. to VITA 35 (P4V2-64ac, P4V0-64).
In the option ‘-32P’ the pin assignment is acc. to IEEE Std 1386-2001, Table 8.
This pin assignment offers the connection of the two PMC-modules via P2.
Front Panel
The front panel of the VME-PMCCADDY/2 has two cutouts for the front panels
of the PMC modules. A blank cover for unused slots is included in the price.
Software
An example library for the initialization of the board in C-Source-Code
for VxWorks is available for a fee on a disk (MS-DOS format). Drivers for other
operating systems are available upon request (please state your operating
system with the version number when you order).
Technical Specifications:
|
VMEbus:
|
|
Controller:
|
TUNDRA Tsi148
|
|
VMEbus access:
|
Legacy protocols
to protect existing VME investment
VME64 extensions
2eVME and 2eSST
protocols
|
|
Base address:
|
Geographical
addressing
|
|
Address modifier:
|
Standard
supervisory and non-privileged data access, extended supervisory and
non-privileged data access, short supervisory and non-privileged access
|
|
VMEbus standard:
|
IEEE 1014 Rev. D
|
|
VMEbus connector:
|
160-pole VG
connector (complementary to DIN 41612), acc. to VME64 extension standard
|
|
LEDs:
|
LEDs in the front
panel indicate VMEbus interrupt and VMEbus access
|
|
PMC/XMC slots:
|
|
Standard:
|
IEEE Std 1386-2001
|
|
Size:
|
Two single size
modules
|
|
VME PCI Bridge:
|
Tundra Tsi148,
32/64 bit at 33/66 MHz
|
|
Voltage level:
|
3.3 V (signal
level) only
|
|
Voltage option:
|
Optional onboard
3.3 V generation
|
|
XMC option:
|
Slot 1 optional
with XMC (J15) interface according to VITA 42.3 standard.
|
|
General:
|
|
Temperature:
|
Standard:
- 0...50 /C
(Order no.: V.1915.02/.11)
- -40...+85 /C (Order no.: V.1915.03 /.13)
Conduction Cooled:
- -40...+85 /C (Order no.: V.1916.02 /.11)
|
|
Humidity:
|
Max. 90 %,
non-condensing
|
|
Connector types:
|
P1, P2: VMEbus
(160 pins)
J11, J12, J21,
J22: PMC address/data
J13, J23: PCI 64
signals
J14, J24: PMC I/O
signals
|
|
Board size:
|
160 mm x 233 mm
|
|
VME dimensions:
|
6 U height, 4 HP
width
|
Order Information:
|
Designation
|
|
Order no.
|
|
VME-PMC-CADDY/2
|
VMEbus CPU board for two single PMC modules, P2-pin
assignment acc. to Vita 35 (P4V2-64ac, P4V0-64) (no interconnection between
PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus
|
V.1915.02
|
|
VME-PMC-CADDY/2-T
|
As V.1915.02, but for extended temperature range
|
V.1915.03
|
|
VME-PMC-CADDY/2-32P2
|
VMEbus base board for two single PMC modules, P2-pin
assignment acc. to IEEE Std P1386-2001, Table 8 (interconnection between 16
pins of the PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus
|
V.1915.11
|
|
VME-PMC-CADDY/2-T-32P2
|
As V.1915.11, but for extended temperature range
|
V.1915.13
|
|
VME-PMC-CADDY/2-CC
|
As V.1915.02, but conduction cooled, extended temperature
range
|
V.1916.02
|
|
VME-PMC-CADDY/2-CC-32P2
|
As V.1915.11, but conduction cooled, extended temperature
range
|
V.1916.11
|
|
VME-PMC-CADDY/2 VxWorks
|
LIB VxWorks library
|
V.1915.58
|
VME-PMC-CADDY/2
Intelligent
VME-Carrier Board for PMC Modules
Download complete data sheet (PDF-File)
Download complete hardware manual (PDF-File)
Master or slave
functionality
4-level arbiter
Address/data up
to A64/D64
VME64-extension
connector
2eVME and 2eSST
fast protocol
Slots according
to IEEE Std 1386-2001 specified
Two single size
PMC modules insertable
VME-PCI Bridge
Tundra Tsi148
PMC I/Os applied
to VMEbus P2, signals routed acc. to VITA 35 (P4V2-64ac, P4V0-64)
Option ‘-32P2’:
different P2-pinning
PPMC according to
VITA 32
Optional one XMC
according to VITA 42.3
PCI 64 bit at 66
MHz, 3.3 V only
Freescale MPC
8349
400 MHz
128 Mbyte DDR2
RAM ECC
4 Mbyte Flash
(NOR)
2x RS-232 serial
interface
Versions for
extended temperature range available
Conduction cooled version
|