esd electronics,inc.
HARDWARE  ●  SOFTWARE  ●  ENGINEERING
Ethernet Technologies
SAE J1939 Technologies
Upcoming Products
Software
SEARCH
Home > Hardware > CAN-Gateways >
DN-CBM-DP Profibus-DP / DeviceNet Gateway
DN-CBM-DP Profibus-DP / DeviceNet Gateway

DN-CBM-DP

Item #: C.2846.02
Availability: Normally Stocked
Usually ships In 2 Weeks



    Quantity:

    DN-CBM-DP

    Profibus-DP / DeviceNet Gateway

    • Fast and reliable linking DeviceNet and Profibus-DP with data buffering DeviceNet-PLC link, e.g. to SIEMENS S7-300 or S7-400
    • No limitation on the number of DeviceNet participants

    Linking DP and DeviceNet

    The module DN-CBM-DP can link any Profibus-DP master to DeviceNet. The DNCBM- DP gateway operates as a slave-I/O component with a total of maximum 312 bytes data (partitioning from up to 244 bytes input and 68 bytes output to 244 bytes output and 68 bytes input data) on the DP-bus.

    Applications

    With the DN-CBM-DP gateway, you can couple modules with DeviceNet implementation to e.g. a SIMATIC-S7, and the module does not limit the number of DeviceNet Participants.

    Physical Interfaces

    Designed according to the DeviceNet Specification Rev. 2.0, the DN-CBM-DP supports all DeviceNet bit rates. The Profibus-DP-Slave interface automatically recognizes all usual bit rates up to 12 Mbit/s. Optocouplers and DC/DC converters electrically isolate both the DP as well as the DeviceNet interface.

    Serial interface

    The module has a serial interface (default: RS-232) for service and configuration, and it is connected by a DSUB9 connector.

    Configuration and Protocol

    For the I/O data mapping of the DP slave, configuration software for Windows95/98 or Windows NT is available. The module DN-CBM-DP supports DeviceNet as Layer-7 protocol.

    Technical Specifications:

    CPU and Serial Interface:

    Microcontroller:

    68331, 25 MHz

    Memory:

    512 k x 16 bit SRAM, 128 k x 8 bit Flash EPROM

    Available interfaces:

    RS-232, RS-485, TTY, max. 38.4 kbit/s

    DeviceNet:

    CAN controller:

    SJA1000, CAN 2.0A/B

    Interface:

    Acc. to DeviceNet Specification Rev. 2.0

    Electrical isolation

    All DeviceNet bit rates supported

    Profibus-DP:

    DP controller:

    SPC3, DP-Slave

    DP interface:

    RS-485, electrically isolated, max. 12 Mbit/s

    General:

    Operating voltage:

    Nominal 24 VDC

    Connectors:

    DeviceNet: 1x 5-pin connection socket

    DP: 9-pin female DSUB

    Serial: 9-pin male DSUB

    Power: UEGM screw connector

     Order information:

    Designation

     

    order no.

    DN-CBM-DP

    DP-DeviceNet Gateway

    C.2846.02

    DN-CBM-DP-ME

    English user’s manual

    C.2846.21

     

     

     

     

     

    DN-CBM-DP

    Profibus-DP / DeviceNet Gateway

    • Fast and reliable linking DeviceNet and Profibus-DP with data buffering DeviceNet-PLC link, e.g. to SIEMENS S7-300 or S7-400
    • No limitation on the number of DeviceNet participants

     

    Download complete data sheet (PDF-File)
    Download complete hardware manual (PDF-File)

    Download software manual(PDF-File)
    Download GSD file(Zip-File)

     



    Phone:800-732-8006 - Fax:800-732-8093 - Web:http://www.esd-electronics-usa.com