ECS-PCIe 1100
EtherCAT® Slave
Interface for PCs
Not recommended for new designs.
SimpleEtherCAT®
Slave Interface for PCs
The ECS-PCIe/1100 is a PC board designed for PCI Express
slots. It features an EtherCAT®
slave using the Ethernet physical layer via two RJ45 Ethernet sockets.The board uses the ET1100 EtherCAT®
slave controller (ESC) ASIC that comes with 8 kBytes memory and 8 EtherCAT® sync managers. The ET1100
ESC address space is directly mapped to the PCIe address space.
Applications
The ECS-PCIe/1100 integrates any PC into an EtherCAT® network and makes it an
EtherCAT® slave node. The PC can act as I/O node. An EtherCAT®
master can use several EtherCAT®
protocols like CoE, FoE and EoE to communicate with the PC.
Configuration and protocols
Configuration accomplished through the EtherCAT® master.
esd provides a sample device description file (XML).
Software Support
Device drivers for Windows and Linux are available. Drivers
for other operating systems, especially realtime-OS, are available on request.
For application development, esd offers a slave API library as well as sample
code.
Technical Specifications:
PCI Express interface:
|
PCIe endpoint:
|
PLX PEX8311
|
PCIe port:
|
according to PCI Express Specification R1.0a
|
Link width:
|
1x
|
EtherCAT® slave controller (ESC):
|
ESC ASIC:
|
ET1100
|
ESC interface:
|
2x RJ45, 100BASE-TX, 100 Mbit/s, IEEE 802.3, electrically
isolated
|
General:
|
Supply voltage:
|
3.3V via PCIe
|
Operating temperature:
|
0...50° C
|
Dimensions [mm]:
|
96mm x 70mm (low profile PCIe)
|
LEDs:
|
ERROR, RUN, EL
|
Connectors:
|
EtherCAT®: 2x RJ45
|
|
PCIe: PCIe card
edge connector
|
Order information:
Designation
|
|
order no.
|
ECS-PCIe/1100
|
PCI Express board with EtherCAT® slave
controller ET1100
|
E.1100.02
|