DN - PCI/331
Intelligent PCI - DeviceNet Interface from PC to one or two independent DeviceNet
-
Microcontroller 68331
-
CAN controller SJA1000, CAN 2.0A/B
- DeviceNet interfaces electrically isolated and designed acc. to DeviceNet Spec. Rel. 2.0, connection via Combicon style connectors
- All DeviceNet bit rates supported
- On-board DeviceNet firmware, master/slave
- Suitable for CANOpen and J1939.
Powerful CAN Interfaces for PCs:
The module CAN-PCI/331 is a PC board designed for the PCI bus using
a microcontroller 68331 to manage local CAN data that is stored in a local SRAM,
and guaranteeing security and consistency of data for up to 1 Mbit/s.
CAN Interface:
The ISO11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s with the ability to set the baud rate with
software. The CAN interface is opto-isolated from the other potentials.
Software Support:
The board ships with software examples for DOS and Windows 3.11 in source code; software drivers are available for
Windows, Linux, VxWorks, LynxOS, QNX, SGI-IRIX6.5, AIX and Solaris. Drivers for
other operating systems are available as well. The firmware can be loaded from
the PC into the Flash EPROM.
CAN Protocols and Real-time Operating System:
Software packages for CAL, CANopen or DeviceNet are available for Windows NT, Windows 95/98 or
UNIX systems.
Technical Specifications:
|
PC Interface
& Microcontroller:
|
|
PCI Bridge
|
PLX PCI90502
|
|
Microcontroller
|
68331
|
|
Memory equipped
|
128 k x 16 bits SRAM
|
|
|
128 k x 8 bits Flash EPROM
|
|
CAN Bus:
|
|
CAN controller
|
SJA1000, CAN 2.0A/B
|
|
CAN interface:
|
ISO 11898, opt. Device
|
|
|
Differential opto-isolated, 1 Mbit/s |
|
General:
|
|
Temperature
|
0…50o
|
|
Humidity
|
Max 90%, non-condensing
|
|
Supply Voltage
|
5 VDC
|
|
Connectors:
|
DeviceNet-option: 5-pole connector
|
|
|
CAN: 9-pole DSUB (male)
|
Order information:
|
Designation
|
|
order no.
|
|
DN-PCI/331-1
|
1x DeviceNet
|
C.2017.02
|
|
DN-PCI/331-2
|
2x DeviceNet
|
C.2017.04
|
|
Options:
|
|
CAN-DRV-LCD
|
License for
Windows & Linux (CD-ROM)
|
C.1101.02
|
|
CAN-PCI/331-RTX
|
License for
Windows RTX
|
C.2020.35
|
|
CAN-PCI/331-Vx
|
License for
VxWorks
|
C.2020.55
|
|
CAN-PCI/331-QNX
|
License for QNX4
|
C.2020.32
|
|
CAN-PCI/331-Co
|
CANopen
master/slave License
|
C.2020.12
|
|
DN-PCI/331-NT
|
Windows NT
Driver
|
C.2017.11
|