|
Home > Hardware > CompactPCI >
CPCI-HD/2: HD-Drive, CompactFlash and 2 SATA Interfaces
CPCI-HD/2
Item #: I.2318.xx
Availability: Call For Pricing - (413) 772-3170 Usually ships In 2 Weeks
Choose your option: |
Order an Accessory: |
Update price
CPCI-HD/2
HD-Drive, CompactFlash and 2 SATA Interfaces
- Single slot 3 U
- On-board hard disk
- CompactFlash-card slot in front panel
- CompactFlash hot-plug capable
- Two Serial ATA interfaces for external drives
Hard Disk Drive On-BoardThe module CPCI-HD/2 is a CompactPCI board in 3 U form factor (4 HP). It is equipped with the SATA-Controller Sil3114 that supports four SATA-channels. There are two channels used as Serial ATA interfaces, one channel is to control a CompactFlash slot and one channel to control the local 2.5” HD drive. The factory installed HD capacity may change upwards with the improvement of drive technology.
CompactFlash Card InterfaceThe board is equipped with a type I CompactFlash cardholder with the card slot accessible through the front panel, supporting ‘Hot pluggable’ operation, and accessing data in ‘True IDE’ mode.
Interfaces for External DevicesTwo on-board SATA plugs allow attachment of two external devices, and modification to rear I/O-connection is possible on request.
Software SupportThe CPCI-HD/2 runs with the standard system drivers of Linux (from Kernel 2.6.19), QNX (from 6.x) and Windows (Vista, 2003 Server, 2000/XP).
Technical Specifications
CompactPCI connection |
Interface |
According to CPCI Specification, Rev. 2.0, 32 bit, 33/66 MHz |
PCI-bridge |
SiI3114 |
Hard Disk Drive and CompactFlash |
IDE device bridge |
SiI3811 |
HD drive |
44-pole 2 mm IDE connector, 2.5” HD drive, capacity >40 GB |
CompactFlash |
According to CompactFlashTM specification, type I CompactFlash card holder, |
|
True IDE’ mode, 3.3 V power supply |
Hot plugging |
Hot plug capability (Linux and Windows systems) |
SATA interface |
SATA controller |
SiI3114, SATA 1.0 specification compliant |
Connector |
SATA signal plug with peg and locking latch |
General |
Ambient temp |
0 ...+50o C |
Humidity |
Max. 90%, non-condensing |
Power supply |
3.3 V / 80 mA, 5V /max. 1.5 A (startup current, typ. with 40 GB HDD) |
|
5V / 0.6 A (quiescent current) |
Status LEDs |
4 LEDs (SATA0 - SATA3 activity) |
Board dimension |
3 U height, 4 HP width |
Order Information
Designation |
|
Order no. |
CPCI-HD/2 |
CompactFlash interface, 2x SATA interface; HD-drive > 40 GB |
I.2318.04 |
CPCI-HD/2-SATA/IDE Interface |
As I.2318.04, but without HD-drive installed |
I.2318.02 |
CPCI-HD/2-IDE-Kit |
Mounting Kit for 2.5” IDE-hard disk |
I.2318.03 |
|