Home > Hardware > CompactPCI >
CPCI-ASI04
Item #:
I.2307.02
Availability: Normally Stocked
Usually ships In 2 Weeks
CPCI-ASIO4
4 Serial Interfaces
- RS-232, RS-422, RS-485 or TTY
- Opto-isolated
-
Support for Linux, VxWorks, Windows XP and QNX6
Opto-Isolated Serial Interfaces
The module CPCI-ASIO4 is a CompactPCI board in Euro format
with four serial interfaces opto-isolated against the CPCI bus and each other.
The board is equipped with two DUARTs XR16C2852 that are compatible to the
popular ST16C2552 allowing control by standard operating system drivers for
serial interfaces (i.e. Linux and VxWorks)
Versatile Interface Design
Piggybacks at the four interfaces allow realization of your
application-specific requirements for a serial interface. You can choose between
RS-232 (with hardware handshake), RS-422, RS-482 or TTY (which runs in passive
or active mode, but in the active mode, the four interfaces loose the
opto-isolation because of the common power supply for the interfaces). One
CPCI-AS104 allows combining of the different interface types with the connection
of the interfaces at the front panel by RJ45 connectors. LEDs display the actual
state of each interface.
Software Support
The board runs with the standard system serial drivers of
Linux and VxWorks. For Windows XP and QNX6 there are special drivers available
upon request.
Technical Specifications
|
CompactPCI
connection
|
|
Interface
|
According to CPCI specification, Rev. 2.0
|
|
PCI-Bridge
|
PCI9030
|
|
Serial
interfaces
|
|
Number of channels
|
4
|
|
Serial controller
|
2x DUART XR16C2852
|
|
Interface types
|
RS-232 (hardware handshake)
|
|
|
RS-422
|
|
|
RS-485
|
|
|
TTY-passive
|
|
|
TTY-active (no opto-isolation)
|
|
Electrical isolation
|
By optocouplers between serial interfaces and
DUARTs and between each other
|
|
Bitrates
|
Up to 115,2 kbit/s
|
|
General
|
|
Ambient temperature
|
0...50o C
|
|
Humidity
|
Max. 90 %, non-condensing
|
|
Operating voltage
|
Nominal 5 V(DC), 3.3 V (DC), ± 12V (if TTY-active
is required)
|
|
Connectors
|
4x RJ45
|
|
Status LEDs
|
4 LEDs for the state of serial interfaces
|
Order Information
|
Designation
|
|
order no.
|
|
CPCI-ASIO4
|
4 serial interfaces, RS-232
|
I.2307.02
|
|
Instead of
RS-232 add with (specify in order):
|
|
|
RS-422 adaptor
|
V.1930.02
|
|
|
RS-485 adaptor
|
V.1930.04
|
|
|
TTY-20mA passive
|
V.1930.06
|
|
|
TTY-20mA active
|
V.1930.08
|
|
Manual
|
|
|
|
CPCI-ASIO4-ME
|
English manual
|
I.2307.21
|