Home > Hardware > CompactPCI >
CPCI-USB-5: CompactPCI USB 2.0 Interface with 6 USB Ports
CPCI-USB-5
Item #: I.2326.01
Availability: Normally Stocked
Usually ships In 2 Weeks
CPCI-USB-5
CPCI USB 2.0 Interface with 6 USB Ports
- 5x USB 2.0 Hi-Speed via front panel
- 1x USB 2.0 Hi-Speed via on-board connector sequentially powering up USB ports
- 1x CompactFlash card slot on-board (option)
- 1x SD card slot on-board (option)
CompactPCI and USB
The CPCI-USB-5 is a CompactPCI board in 3U format. It is equipped with an NEC μPD720101, a USB 2.0 host controller that supports 5 Hi-Speed USB 2.0 interfaces where one is multiplied by an on-board HUB.
The 5 external USB 2.0 interfaces are accessible via USB connectors (type A, female) in the front panel. The internal USB 2.0 interface is accessible via a 5-pin DUBOX connector located on the board. Power control and overcurrent protection are ensured for all 6 USB interfaces.
The CDC-device reduces the starting power requirements by sequentially powering up the USB ports.
Seven user specific LEDs and one LED for the internal medium/device are located in the front panel.
Optional CompactFlash and SD Card Interface
Optionally, the CPCI-USB-5-CF/SD is available with an on-board CompactFlash card slot and an SD memory card slot.
Software Support
The CPCI-USB-5 runs with standard drivers of common operating systems such as Windows and LINUX.
Technical Specifications:
|
CompactPCI Bus: |
|
Interface: |
PCI bus according to PCI Local Bus Specification 2.2, 32 bit, 33 MHz |
|
Controller: |
NEC μPD720101 |
|
PCI Bus Voltage: |
‘Universal Board’, 3.3 V (5 V tolerant) |
|
USB: |
|
Interface: |
5x USB 2.0, Hi-Speed via front panel,
1x USB 2.0 Hi-Speed via on-board connector |
|
Host Controller: |
NEC μPD720101 USB 2.0 Host Controller, up to 480 Mbit/s |
|
CompactFlash and SD Memory Option (I.2326.02 only): |
|
CompactFlash: |
according to CompactFlashTM specification,
type I CompactFlash card holder, ‘True IDE’ mode only, 3.3 V power supply |
|
SD Card: |
SD memory card holder |
|
General: |
|
Operating temperature: |
0...50° C |
|
Dimensions: |
Euro Format (160 mm x 100 mm), with 3 U height, 4 HP width front panel |
|
Connectors: |
USB External: 5x USB, type-A, female
USB Internal: 1x 5-pin DUBOX male socket
SD slot: optional 1x SD card holder on-board
CompactFlash Card: optional 1x type I CompactFlash card holder on-board |
Order Information:
|
Designation |
|
Order no. |
|
CPCI-USB-5 |
CPCI USB 2.0 interface with 5x USB 2.0 via front panel,1x USB on-board connector |
I.2326.01 |
|
CPCI-USB-5-CF/SD |
as I.2326.01 but with 1x CompactFlash card slot* and 1x SD memory card slot* on-board |
I.2326.02 |
|
*Pluggable storage media are not included in the scope of delivery. |