PMC – CAN/331

Intelligent PMC-CAN-Interface

• PMC module with one or two independent CAN nets
• Microcontroller 68331 for local data management
• CAN controller SJA1000 (CAN2.0A/B)
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Firmware updates possible
• 3.3 V signal voltage version available
• Suitable for CANOpen and J1939.

Powerful CAN Interfaces on PMC Module

The module PMC-CAN/331 uses a 68331 microcontroller that cares for the local CAN-data management. The CAN data is stored in the local SRAM with guaranteed security and consistency of data to 1 Mbit/s.

CAN Interface

The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s. The CAN interfaces are electrically isolated with optocouplers and DC/DC converters.

Software Support

The board ships with software examples in source code for DOC and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH and other operating systems.

CAN Protocols

esd has software packages for CAL, CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems.

Technical Specifications

PMC interface and microcontroller
PCI Bridge	PCI9052
Microcontroller	68331
Memory Equipped	128k x 16-bit SRAM, 128k x 8-bit Flash EPROM
CAN bus
CAN controller	SJA 1000, CAN 2.0 A/B
CAN interface	Differential, electrically isolated, 1 Mbit/s, ISO11898, opt. DeviceNet
General
Ambient temperature	0…50o C
Supply voltage	5 VDC
Connectors	PMC – 2x 64-pole PMC connectors, CAN – 2x 9-pole DSUB (male)

Order information

Designation		order no.
PMC-CAN/331-1	1x CAN, ISO 11898	C.2025.02
PMC-CAN/331-2	2x CAN, ISO 11898	C.2025.04
PMC-CAN/331-1DN	1x DeviceNet	C.2029.02
PMC-CAN/331-2DN	2x DeviceNet	C.2029.04
Licenses
CAN-DRV-LCD	Object license CD-ROM for Windows & Linux	C.1101.02
PMC-CAN/331-VxW	VxWorks Object license	C.2025.57
PMC-CAN/331-Co	CANopen master/slave object license	C.2025.12
PMC-CAN/331-LynxOS-PPC	LynxOS object license for PowerPC systems	C.2025.53
PMC-CAN/331-LynxOS-X86	LynxOS object license for X86 systems	C.2025.59
PMC-CAN/331-RTOS/69k	RTOS-UH object license for 68k systems	C.2025.55
PMC-CAN/331-RTOS/PPC	RTOS-UH object license for PowerPC systems	C.2025.54
Manuals
PMC-CAN/331-ME	Hardware manual	C.2025.21
CAN-API-ME	Software manual	C.2001.21
CAL-CANopen-ME	CANopen manual	C.2002.21

PMC – CAN/331

Intelligent PMC-CAN-Interface

• PMC module with one or two independent CAN nets
• Microcontroller 68331 for local data management
• CAN controller SJA1000 (CAN2.0A/B)
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Firmware updates possible
• 3.3 V signal voltage version available
• Suitable for CANOpen and J1939.

Download complete data sheet (PDF-File)
Download complete product manual (PDF-File)

PMC – CAN/331

Intelligent PMC-CAN-Interface

• PMC module with one or two independent CAN nets
• Microcontroller 68331 for local data management
• CAN controller SJA1000 (CAN2.0A/B)
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Firmware updates possible
• 3.3 V signal voltage version available
• Suitable for CANOpen and J1939.

The module PMC – CAN/331 uses a 68331 microcontroller to provide local CAN-data management, and the CAN data is guaranteed up to 1 Mbit/s. The PMC – CAN/331 is fully ISO 11898 compliant with one or two independent CAN interfaces that allow a data transfer rate of 1 Mbit/s and are electrically isolated by optocouplers and DC/DC converters.

esd electronics ships the PMC – CAN/331 with software source code for DOS and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH, and others upon request. esd electronics also has software packages for CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems.