CPCI-CPU/5200

CompactPCI PowerPC with FPU, ETHERNET and CAN

• PowerPC Motorola MPC5200 with FPU
• 10/100BaseT ETHERNET
• CAN & RS-232 interfaces
• CompactFlash slot on-board
• Low power consumption

Not recommended for new designs!

CompactPCI PowerPC board

The CPCI-CPU/5200 is a CompactPCI board in 3U format. The Motorola PowerPC MPC5200 with 400 MHz enables a performance of up to 760 MIPS. With the internal FPU the board is well prepared for closed loop control applications. The board is equipped with up to 128 Mbyte SDRAM and 32 Mbyte Flash and a CompactFlash slot to carry various memory cards. A nonvolatile NVRAM enables the CPCI-CPU/5200 to save valuable process variables during power off sequences. A local RTC with battery backup offers real time date and time.

Network Interfaces

The CPCI-CPU/5200 comes with an ETHERNET interface for 10/100 Mbit/s nets that is accessible via a RJ45 connector in the front panel. The ISO11898 compatible CAN interface CAN0 is accessible via a DSUB9 connector in the front panel. The CAN interface is electrically isolated and supports bit rates up to 1 Mbit/s. The serial interface SER0 with RS-232 transceiver connects via a RJ12 connector in the front panel. Additionally a second CAN and a second serial interface (CAN1/SER1) are accessible via a 10-pole post connector. These interfaces have TTL-level signals only and can be adapted easily with add-ons for physical layers (please order CPCICAN- ISO-11898).

Software Support

The flash memory carries the standard ‘U-Boot’ program that enables the CPCI-CPU/5200 to boot various operating systems from network, on-board Flash or CompactFlash. Linux and VxWorks are directly supported with full support of on-board drivers by esd, others on request. Higher layer protocols like CANopen, DeviceNet, and an on-board web server are available.

Technical Specifications

CompactPCI interface and microcontroller:
Microcontroller:	Motorola MPC5200, 400 MHz, 760 MIPS
Memory equipped:	From 8 M x 32 bit SDRAM (32 MB), Up to 32 M x 32 bit SDRAM (128 MB), 32 M Flash EPROM, 32 KB NVRAM
terfaces:
ETHERNET:	10/100BaseT, IEEE802.3, RJ45-connector
Serial:	1x RS-232 at RJ12, 1x TTL-level at 10-pole post-connector
CAN:	CAN 2.0A/B, 1 Mbit/s, 1x electrically isolated ISO11898 at 9-pole DSUB, 1x TTL level at 10-pole post-connector
CompactFlash:	Type I cards, true IDE mode
General:
Ambient temp.:	0...50 /C
Humidity:	Max. 90 %, non-condensing
Power supply:	5 V, 3.3 V
Connectors:	CAN: 9-pole DSUB (male)
Serial:	RJ12 10/100BaseT: RJ45

Order information

Designation		Order no.
CPCI-CPU/5200	PowerPC MPC5200 , 400 MHz 128 MB SDRAM, 32 MB Flash	I.2404.02
CPCI-CPU/5200-VxW	VxWorks BSP/adaption	I.2404.30
CPCI-CPU/5200-Linux	Linux BSP/adaption	I.2404.32
CPCI-CAN-ISO-11898	CAN and RS-232 adapter, 3 U / 4 HP front panel	I.2301.03

CPCI-CPU/5200

CompactPCI PowerPC with FPU, ETHERNET and CAN

• PowerPC Motorola MPC5200 with FPU
• 10/100BaseT ETHERNET
• CAN & RS-232 interfaces
• CompactFlash slot on-board
• Low power consumption

Not recommended for new designs!

Download complete data sheet (PDF file)

CPCI-CPU/5200

CompactPCI PowerPC with FPU, ETHERNET and CAN

• PowerPC Motorola MPC5200 with FPU
• 10/100BaseT ETHERNET
• CAN & RS-232 interfaces
• CompactFlash slot on-board
• Low power consumption

Not recommended for new designs!

esd electronics, Inc designed the CPCI - CPU/5200 as a CompactPCI board in 3U format including the powerful Motorola PowerPC MPC5200 with 400 MHz to enable a performance of up to 760 MIPS. With the internal FPU, the board is well prepared for closed loop control applications. The CPCI - CPU/5200 comes equipped with up to 128 Mbyte SDRAM and 32 Mbyte Flash and a CompactFlash slot to carry various memory cards. The nonvolatile NVRAM enables the CPCI - CPU/5200 to save valuable process variables during power off sequences, and a local RTC with battery backup offers real time date and time.

The CPCI - CPU/5200 contains an ETHERNET interface for 10/100 Mbit/s nets connected through a RJ45 connector and a fully ISO 11898 compliant, electrically isolated CAN interface CAN0 with bit rates up to 1 Mbit/s connected through a DSUB9 connector both are accessible through the front panel. esd electronics has included a serial interface SER0 with RS-232 transceiver and a RJ12 connector that can be connected through the front panel. There is also a second CAN and a second serial interface (CAN1/SER1) accessible through the 10-pole post connector with TTL-level signals only that can be adapted with add-ons for physical layers (please order CPCICAN- ISO-11898).

The flash memory in the CPCI - CPU/5200 carries the standard U-Boot program enabling the module to boot various operating systems from networks, on-board Flash, or CompactFlash directly supporting Linux and VxWorks with full support of on-board drivers by esd electronics. Higher layer protocols like CANopen and DeviceNet as well as an on-board web server are available.