CPCI-CPU/750

CompactPCI PowerPC with Ethernet & CAN

• PowerPC IBM 750FX with up to 1850 DMIPS
• Giga ETHERNET 10/100/1000 Base T
• CAN & RS-232 interfaces
• CAN controller SJA1000 (CAN 2.0A/B)
• CAN interfaces electrically opto-isolated, designed acc. to ISO 11898, 1 Mbit/s
• CompactFlash card slot
• Linux or VxWorks operation systems
• Suitable for CANopen and J1939

CompactPCI PowerPC board:

The CPCI-CPU/750 is a Compact PCI board in 3U format. The powerful IBM PPC750FX with 733 or 800 MHz enables a performance of up to 1850 DMIPS. With on-board PCI-arbiter and PCI-clock distributor, it acts as a CompactPCI host.

The board is equipped from 64 to 512 Mbyte DDR-SDRAM with ECC and 64 Mbyte Flash. A non-volatile NVRAM/RTC enables the CPCI-CPU/750 to save valuable process variables during power off sequences.

Network Interfaces:

The CPCI-CPU/750 comes with an ETHERNET interface that is accessible as 10/100/1000 BaseT through the RJ45 connector in the front panel. The CPCI-CPU/750 provides a CAN interface based on a SJA1000 CAN controller, and it is fully ISO 11898 compliant, is electrically isolated, has a DSUB9 connector, and allows data transfer rates of 1 Mbit/s. A serial port is available as RS-232 through a RJ12 connector.

Software Support:

The Flash memory carries the standard ‘U-Boot’ program that enables the CPCI-CPU/750 to boot various operating systems from the network or on-board Flash directly supporting Linux, RTLinux and VxWorks as well as other systems upon request. Higher layer protocols like CANopen as well as an on-board web server are available.

Technical Specifications

CompactPCI Interface & Microcontroller
Microcontroller	IBM PPC750FX, 733/800 MHz, 32bit
Memory equipped	From 8 M x 64 bit DDR SDRAM (64 MB) up to 64 M x 64 bit DDR SDRAM (512 MB) 32 M x 16 bit Flash EPROM (64 Mb) 32 KB NVRAM
Interfaces
ETHERNET	10/100BaseT, IEEE802.3, RJ45-connector
Serial	1x RS-232 at RJ12
CAN	Controller SJA1000, CAN 2.0A/B, opto-isolated, 1 Mbit/s, ISO11898, DSUB9 connector
General
Ambient temperature	0...50o C
Humidity	Max. 90%, non-condensing
Power supply	5V / 3A, 3.3V / 600mA
Connectors	CAN: 9-pole DSUB (male)
	Serial: - RJ12
	10/100BaseT: RJ45

Order Information

Designation		order no.
CPCI-CPU/750	CompactPCI host CPU, IBM PPC750FX, 733 MHz, 256 MB SDRAM, 64 MB Flash	I.2402.02
CPCI-CPU/750-VxW	VxWorks BSP/adaption	I.2402.31
CPCI-CPU/750-Linux	Linux BSP/adaption	I.2402.32

 

 

CPCI-CPU/750

 

CompactPCI PowerPC with Ethernet & CAN

• PowerPC IBM 750FX with up to 1850 DMIPS
• Giga ETHERNET 10/100/1000 Base T
• CAN & RS-232 interfaces
• CAN controller SJA1000 (CAN 2.0A/B)
• CAN interfaces electrically opto-isolated, designed acc. to ISO 11898, 1 Mbit/s
• CompactFlash card slot
• Linux or VxWorks operation systems
• Suitable for CANopen and J1939

 

Download complete data sheet (PDF-File)
Download complete product manual (PDF-File)
Download CAN API Part 1 Manual (PDF-File)
Download CAN API Part 2 Installation (PDF-File)

CPCI-CPU/750

 

CompactPCI PowerPC with Ethernet & CAN

• PowerPC IBM 750FX with up to 1850 DMIPS
• Giga ETHERNET 10/100/1000 Base T
• CAN & RS-232 interfaces
• CAN controller SJA1000 (CAN 2.0A/B)
• CAN interfaces electrically opto-isolated, designed acc. to ISO 11898, 1 Mbit/s
• CompactFlash card slot
• Linux or VxWorks operation systems
• Suitable for CANopen and J1939

CPCI - 750 CompactPCI PowerPC with ETHERNET and CAN

esd electronics, Inc designed the CPCI - 750 as a CompactPCI board in 3U format including a powerful IBM PPC750FX with 733 or 800 MHz to enable a performance of up to 1850 DMIPS. With the on-board PCI-arbiter and PCI-clock distributor, the CPCI - 750 acts as a CompactPCI host. The board includes a non-volatile NVROM/RTC enabling it to save valuable process variables during power off sequences and handles 64 to 512 Mbyte DDR-SDRAM with ECC and 64 Mbyte Flash.

 

The CPCI - 750 comes with an ETHERNET interface that is accessible as 10/100/1000Base T through a RJ45 connector in the front panel, and provides a CAN interface based on a SJA1000 CAN controller. esd electronics, Inc has designed the CPCI - 750 as fully ISO 11898 compliant with electrical isolation and a DSUB9 Connector that allows data transfer rates of 1 Mbit/s. There is a serial port available as RS-232 through a RJ12 connector.

 

The Flash memory carries the standard “U-Boot” program enabling the CPCI - 750 to boot various operating systems from network or on-board Flash directly supporting Linux, RTLinux and VxWorks with full support of on-board drivers by esd electronics. Higher layer protocols like CANopen as well as an on-board web server are available.