CAN-PCI/266

Passive 66 MHz PCI-CAN-Interface

• PCI-CAN interface with 1 OR 2 CAN channel
• PCI 2.2 interface, 32 bit, 66 MHz at 3.3 V signal voltage or 33 MHz at 5.0 V
• CAN controller SJA1000 (CAN 2.0 A/B)
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
• Suitable for CANOpen and J1939.

Powerful CAN Interface for PCs

The module CAN-PCI/266 is a low cost PC board designed for 66 MHz PCI bus systems that uses a PCI bus width of 32 bits or in 33 MHz PCI bus systems at a bus speed of 33 MHz.

CAN Interface

The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s, is opto-isolated, and, among many other features, has the ability to set the bit rate through the software.

Software Support

Software drivers are available for Windows, Linux, QNX and other operating systems upon request. Please note: The performance of the host CPU may limit the maximum effective CAN bit rate value because this is a passive CAN module without a microcontroller on-board.

Technical Specifications

PCI Interface:
PCI bridge	PLX PCI9056
Specification	PCI 2.2
Bus speed	66 MHz at 3.3 V signal voltage or 33 MHz at 3.3 or 5.0 V signal voltage
CAN:
CAN controller	SJA1000, CAN 2.0A/B
CAN interface	differential, electrically isolated, 1 Mbit/s, ISO11898, option DeviceNet
General:
Temperature	0...50o C
Humidity	max. 90%, non-condensing
Supply voltage	3.3 VDC and 5 VDC
Connectors	CAN - 9-pole DSUB (male)
LEDs	4 status LEDs

Order Information

Designation		order no.
CAN-PCI/266-1	1x CAN 2.0A/B, ISO11898	C.2036.02
CAN-PCI/266-2	2x CAN 2.0A/B, ISO11898	C.2036.04
Licenses:
CAN-DRV-LCD	Object license CD-ROM for Windows & Linux	C.1101.02
CAN-PCI/266-Vx	VxWorks object license	C.2036.55
Manuals:
CAN-PCI/266-ME	Hardware manual	C.2036.21
CAN-API-ME	Software manual	C.2001.21

CAN-PCI/266

Passive 66 MHz PCI-CAN-Interface

• PCI-CAN interface with 1 or 2 CAN channel
• PCI 2.2 interface, 32 bit, 66 MHz at 3.3 V signal voltage or 33 MHz at 5.0 V
• CAN controller SJA1000 (CAN 2.0 A/B)
• CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
• Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
• Suitable for CANOpen and J1939.

Download complete data sheet (PDF-File)
Download Hardware Installation & Technical Data (PDF-File)
Download CAN API Part 1 Manual (PDF-File)
Download CAN API Part 2 Manual (PDF-File)
Download CANopen Manager Software Manual (PDF-File)
Download CANopen Slave Software Manual (PDF-File)

CAN-PCI/266

Passive 66 MHz PCI-CAN-Interface

The module CAN - PCI/266 is a powerful, low cost PC board designed for 66 MHz PCI bus systems that uses a PCI bus width of 32 bits. The fully ISO 11898 compliant module can also be used in 33 MHz PCI systems at a bus speed of 33 MHz, and allows a data transfer rate of 1 Mbit/s. Among many other features, the bit rate can be set by software, and the CAN interface is electrically isolated from the other potentials.

Software drivers are available for Windows, Linux, QNX, and esd electronics, Inc will make drivers for other operating systems available upon request.