|
|
Home > Upcoming Products > New at esd >
CAN-CBX-CPU5201: Stand alone, PowerPC Controller
CAN-CBX-CPU5201
Item #: C.3071.xx
Availability: Normally Stocked
Usually ships In 2 Weeks
Choose your option:
Update price
CAN-CBX-CPU5201
Powerful Realtime Controller in a Smart Format
PowerPC™ MPC5121 with FPU, 400 MHz
0.5 GB SDRAM
1 GB NAND-Flash
100BASE-TX Ethernet
2 High Speed CAN interface acc. to ISO 11898-2, 1 Mbit/s (1x electrically isolated, 1x at InRailBus)
USB 2.0 full-speed host
Option: CODESYS - COntroller DEvelopment SYStem® programming and run-time system according to IEC 61131-3
PROFIBUS-DP® Slave (as option)
EtherCAT®-Master (as option)
DIN-EN carrier rail mounting (TS 35)
PowerPC™ Device The CAN-CBX-CPU5201 is a stand-alone module with a powerful 400 MHz PowerPC™, 0.5 GB DDR2-SDRAM, 1GB NAND-Flash and RTC with battery backup on-board.
InRailBusThe CAN-CBX-CPU5201 module allows application of the power supply and the CAN bus signals through the InRailBus connector (TBUS-connector) integrated in the mounting rail or separately through the clamp-connection. The InRailBus allows removal of individual modules without interrupting the bus signals.
Communication Interfaces The CAN-CBX-CPU5201 comes with a 100BASE-TX ETHERNET interface that is accessible via an RJ45 plug in the front, and includes the ability to connect a USB device (e.g. printer, memory stick) on the front side USB 2.0 Host interface running with full-speed. esd electronics, Inc designed the two CAN interfaces according to ISO11898-2 high-speed layer and support bit rates up to 1 Mbit/s. One CAN interface is electrically isolated and is accessible via a 5-pole Combicon-style connector. The other CAN interface (optional electrically isolated) is connected to the InRailBus for local CBX-I/O expansion. A serial RS-232 interface for terminal and debugging is accessible via an RJ12 connector.
Software Support esd electronics, Inc offers Linux or QNX 6.0 as operating systems with others available upon request. With the IEC61131- 3 programming and run-time system CoDeSys, the controller can act as a PLC optionally.
Technical Specification:
|
Micro controller + Memory: |
|
Micro controller: |
PowerPC™ MPC5121, 400 MHz |
|
Memory: |
0.5 GB SDRAM, 1 GB NAND-Flash |
|
Ethernet: |
|
Interface: |
100BASE-TX, IEEE 802.3, RJ45 |
|
CAN: |
|
Controller: |
2x Freescale MSCAN, ISO 11898-1 |
|
Interface: |
2x high-speed, ISO 11898-2, max. 1 Mbit/s |
|
Connector: |
1x electrically isolated, 5-pin COMBICON style
1x InRailBus |
|
USB: |
|
Interface: |
USB 2.0 Host, Full-Speed, USB Type-A |
|
Profibus-DP Slave: (Option) |
|
Controller: |
VPC3+ Profibus-DP slave |
|
Interface: |
RS-485, max. 12 Mbit/s, DSUB-9f |
|
General: |
|
Operating supply voltage: |
typ. 24 V DC
min. /max.: 12 V DC / 32 V DC |
|
Current consumption: |
typ. 210 mA (at typ. supply voltage) |
|
Ambient temperature: |
Operational: -20°C to +60°C
Storage/transport:-20°C to +70°C |
|
Relative humidity: |
Max. 95 % (non-condensing) |
|
Dimensions [mm]: |
22.5 x 112 x 113 |
|
Weight: |
ca.160 g |
Order Information:
|
Designation |
|
order no. |
|
CAN-CBX-CPU5201 |
Linux |
C.3071.02 |
|
CAN-CBX-CPU5201/ DP |
Linux, Profibus-DP-Slave Option |
C.3071.03 |
|
CAN-CBX-CPU5201 |
QNX 6.x |
C.3071.04 |
|
Please ask for EtherCAT master stack, CoDeSys PLC and further options |
|