Home > Upcoming Products > New at esd >
ECX-PoE-PE Power Extractor for InRailBus
ECX-PoE-PE
Item #: E.3020.02
Availability: Normally Stocked
Usually ships In 2 Weeks
ECX-PoE-PE
Power-Extractor for InRailBus
Under Development - Available Q1 2011
-
24 VDC power supply for InRailBus via Power over Ethernet
-
Applicable with ECX and CBX units
-
Designed for hat-rail mounting
Power-Extractor
Designed to use in both ECX and CBX units, the ECX-PoE-PE is
a power extractor that provides 24 V power supply voltage for the InRailBus. The
power supply voltage feeds through the Ethernet lines (PoE).
esd designed the module for hat-rail mounting in a control enclosure.
The connectors and status LEDs mount in the front panel.
Physical Interfaces
The ECX-PoE-PE supports IEEE 802.03at (PoE+, layer 1 only),
and is compatible with IEEE 802.03af (Class 4). Ethernet data
(10/100/1000BASE-T) passes through electrically.
The ECX-PoE-PE comes with LEDs that indicate the state of
operation and the states of the temperature- and the output current control.
Technical
Specifications:
|
Microcontroller:
|
|
Microcontroller:
|
PIC16, 8 MHz
|
|
Data & Data/PoE
interfaces:
|
|
Ethernet:
|
data (10/100/1000BASE-T), electrically passed through
|
|
PoE supply:
|
according to IEEE 802.03at (PoE+, only layer 1 is
supported), and compatible with IEEE 802.03af (Class 4)
|
|
General:
|
|
Input voltage:
|
36 - 57 VDC
|
|
Output voltage:
|
24 VDC ±5%
|
|
Power output:
|
maximum 24 W (Derating from approx. 35° C)
|
|
Operating temperature:
|
- 20 ... + 60° C
|
|
Protection class:
|
IP20
|
|
CE-Conformity:
|
according to EU-Directive 2004/108/EG (2004-12-15)
|
|
Dimensions:
|
22.5 mm x 99 mm x 114.5 mm
|
|
Weight:
|
ca. 132 g
|
|
Connectors:
|
InRailBus: TBUS connector
|
|
Data & Data/PoE:
|
2x RJ45
|
|
Power:
|
4-pin spring force plug 5.08
|
Order information:
|
Designation
|
|
Order no.
|
|
ECX-PoE-PE
|
Power-Extractor for InRailBus, applicable with ECX and CBX
units
|
E.3020.02
|